samshu:
...Hi Zaurux,
My version of pCP8 supports IPV6, but not has routing function.
Hi Samshu,
Thank you. When I understood that I had to replace "KERNEL" with the right number, I was able to install the extension and IPV6.
I can connect the RPI4 directly (without switch) to my HQPlayer server in IPV6. It is recognised and I avoid a device (switch).
Only 2ms of ethernet latency in direct without perturbations.
Taking Italjet's request again, I thought I could try the same thing with my Allo USBridge (CM3) using the 44k kernel.
Best hardware isolation than RPI4... but It doesn't work.
I don't have access to the USBridge via the network but I think it's not a power problem but a module problem. I don't think the ASIX (usb ethernet onboard) module is integrated in EVL kernel modules package.
It's almost perfect but in any case, a big thank you... thanks for Bill Evans and Chick Corea.
- 代碼: 選擇全部
dmesg on USBridge (CM3) and pCp 8.1 (legacy) :
..
[ 3.011632] usb 1-1.2: new high-speed USB device number 3 using dwc_otg
[ 3.112427] usb 1-1.2: New USB device found, idVendor=152a, idProduct=8829, bcdDevice= 3.12
[ 3.112438] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.112447] usb 1-1.2: Product: USB HiRes Audio
[ 3.112456] usb 1-1.2: Manufacturer: MUSICIAN
[ 3.191628] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 3.297467] usb 1-1.3: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
[ 3.297478] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.297487] usb 1-1.3: Product: AX88179
[ 3.297496] usb 1-1.3: Manufacturer: ASIX Elec. Corp.
[ 3.297505] usb 1-1.3: SerialNumber: 00000000000028